Mitsubishi Triton MV (2024 onwards) - Raw Predator XPR Lift Kit - Preassembled Struts

Type: Triton

Model: MV

Year: 2024 onwards

Suspension Type: Coil Spring Front / Leaf Spring Rear

Front Lift: 0-75mm

Rear Lift: 30-40mm

Detail: Ute / Dual Cab
Performance - Predator
46mm Bore Monotube Nitrogen Gas Charged
Front Preassembled Struts & Coils Preset to 75mm
0-75mm Adjustable Spring Seat making it perfect for leveling the nose of your vehicle.
* Note: Lifts over 50mm require Upper Control arms

Predator XPR: Height Adjustable Coil Over Strut

The team at RAW 4x4 have developed a new range of premium height adjustable coil over struts, providing precision ride height adjustment.

The RAW Predator XPR series has been specifically designed to raise the front of coil over vehicles between 2 - 3", making it perfect for leveling the nose of your vehicle and or when further accessories are installed. Based on a monotube design the RAW Predator struts provide the ultimate balance of comfort and control, with increased vehicle stability.

Before fitting Predator XPR parts to registered road vehicles, please refer to your Local Laws as an engineering certificate may be required.

Performance Range: The RAW Predator range brings together on road prowess and off road durability into a fast acting monotube design. The Predator delivers that elusive feeling of comfort and control. If you use your 4WD for day to day running around and off road adventures on the weekend, the Predator is what you are looking for.

The Predator series has been specifically designed for the 4x4 owner who is looking for that sometimes elusive combination of comfort and control. The design of the Predator is one of the most efficient heat dissipating shock absorber designs due to the single wall construction resulting in consistent performance on & off road with sharper steering response, less body roll and improved traction.

If you use your 4WD for day to day running around and off road adventures on the weekend, the Predator is what you are looking for.

Threaded Tube

Equipped with a threaded outside tube, a spanner is included to adjust the height of the spring seat collar to provide additional lift at the guard.

Preassembled for easy installation

All Predator XPR struts are preassembled with a coil, pin bushes and strut mount for easier adjustment and safer installation.

Made in Australia

Made in Australia the RAW Predator XPR series are manufactured at RAW 4x4's Newcastle facility.

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.